14
LITTLE
WONDER
PROVAC SI
OPERATION
STOPPING THE ENGINE
1. Turn off the engine by moving the throttle to the
“STOP” position. Let the engine and fan come to a
complete stop.
EMPTY DEBRIS BAG
1. Turn off the engine by moving the throttle to the
“STOP” position. Let the engine and fan come to a
complete stop before removing the debris bag.
2. Roll vacuum to the unloading location.
3. Lift up on the handle of the discharge chute to remove
it from the housing.
4. With one hand, tilt the unit backwards until the bag is
resting on the ground. Then remove the bag from the
studs located on the handle bars. Avoid dragging the
bag to prolong the bag life.
5. Unzip the rear panel of the bag,hold the discharge
chute handle, and the top front handle to easily unload
the contents.
6. Close the zipper on the back panel, place the top
straps onto the handle posts and connect the dis-
charge chute to the discharge port.
Before performing any type of maintenance on the
machine, stop engine and wait for all parts to stop
moving. Failure to follow this instruction could re-
sult in personal injury or property damage.
Before performing any type of maintenance on the
machine, stop engine, wait for all parts to stop mov-
ing and disconnect spark plug. Failure to follow this
instruction could result in personal injury or prop-
erty damage.
REMOVING BLOCKAGES / CLOGS
1. Turn off the engine by moving the throttle to the
“STOP” position. Let the engine and fan come to a
complete stop.
2. Remove spark plug wire.
3. Remove bag and/or hose and clear the blockage.
Wear gloves as there may be sharp materials in the
clog.
4. Reinstall the bag and/or hose.
5. Reconnect spark plug wire.
