9
LITTLE
WONDER
PROVAC SI
SET-UP INSTRUCTIONS
TOOLS REQUIRED
• Adjustable wrench
• 9/16” wrench
• 3/8” wrench
• 5/16” nut driver or ratchet with 5/16” socket
• Side cutting pliers or wire cutters/heavy duty scissors
1. Open the box and remove:
•
Upper Handle
• Cardboard Insert
•
Filter bag
•
Exhaust Nozzle
•
Nozzle Endcap
• Manual
• Hardware Bag
Do not use this product if it is not completely assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and completely assembled could result in seri-
ous personal injury.
Do not attempt to modify this product or create accessories not recommended for use with this
product. Any such alteration or modification is misuse and could result in a hazardous condi
-
tion leading to possible serious personal injury.
Do not attempt to lift the unit by the handle assembly. If it is necessary to lift the vacuum, al-
ways grasp by the frame. Use proper lifting techniques to avoid back injury.
The vacuum and the packaging are not children’s toys! Children must not play with plastic
bags, sheets and small parts. There is a danger of choking and suffocation!
2. Cut the back of the box open. Use lower handle to
roll unit out of the box.
3. Locate hardware package.
Figure 1
4. Connect the upper handle to lower handle using four
3/8-16 carriage bolts and four 3/8-16 nuts from the
hardware bag. Tighten with the adjustable wrench
and the 9/16” wrench. Tighten the nuts securely but
not so much as to crush the tube.
Figure 2
