11
ENG
2. Up to 90 measurement results and mean value of last
3 measurements may be kept in each device memory.
When the number of measurements exceeds 90, the oldest
record is deleted to save the most recent values.
3. Press the M1 (or M2) Button to see the fi gures stored
in the memory.At the fi rst depression of button M1 « »
(or М2 « ») mean value of 3 last measurements, kept in
memory M1 (or M2), will appear on the screen, marked
by symbol«А» (fi g. 17). At repeated depression of button
M1 (or M2) indicator of selected
memory М1 « » (или М2 « ») and
number of memory cell will appear
on the screen, and in 1 second its
content is displayed (fig. 18). When
content of memory cell is displayed,
date and time of measurement
are displayed alternately in the
display lower line. Each depression
of button M1 (or M2) causes
shifting to the next memory cell.
MEMORY CLEARING
To delete all values stored in the memory, press the
M1 (or M2)
Button and hold it down for more than 5 seconds. Symbols “Clr” will
appear on the screen and all values will be deleted from the memory.
INFORMATION ABOUT ERRORS
Indication
Likely cause
Methods of correction
The arm cuff is applied
incorrectly or the air tube plus
is inserted not tightly enough.
Measurements cannot
be made due to hand
movement or talking during
measurements.
Be sure that the arm cuff is
applied correctly and the plug is
inserted tightly. Repeat the whole
measurement procedure.
Repeat the measurement
following strictly the
recommendations of this Manual.
Batteries are discharged.
Replace the batteries for new
ones.
Fig.18
Fig.17
