12
ENG
Every time the
blood pressure is
different.
Measurements are
too low/high.
Check that the arm cuff
is level with your heart?
Check that the arm cuff
is applied correctly?
Perhaps your arm
muscles are tough?
Perhaps you talk or
move your arm during
the measurement?
Take the correct position for
measurement.
Take the correct position for
measurement.
Apply the arm cuff correctly.
Keep silence and quiet during
measurement.
Measurements of
the pulse rate are
too high/low.
Perhaps you talk or
move your arm during
the measurement?
Perhaps you make
measurement directly
after physical load?
Keep silence and quiet during
measurement.
Repeat the measurement at least
in 5 min.
Impossibility to
make a large
of number of
measurements.
Application of poor
batteries.
Use only alkali batteries of well-
known manufacturers.
Independent
changing-over to
mode of date and
time indication.
System of automatic
change-over to mode of
date and time indication
operates
This is not a trouble. The device
is automatically changed over to
mode of date and time indication
in 3 minutes after use.
If regardless of the above recommendation you are unable to get correct
measurement results, stop the use of this Device and apply to a maintenance
organization (addresses and telephones of authorized organizations may be found
in the warranty card). Do not try to adjust the internal mechanism by yourself.
WARRANTY
1. The following LD product is covered by warranty for the period speci
fi
ed
in the warranty card.
2. The warranty liabilities are contained in the warranty card given at the
sale of this Device to a purchaser.
3. The addresses of organizations for warranty maintenance are given in the
warranty card.
TECHNICAL SPECIFICATIONS
Measurement method
oscillometric with Fuzzy Algorithm
Display
LCD
Pressure indication range in
an arm cuff, mmHg
from 0 to 300
