9
Now, the brake line assembly with brake calliper and also gear cable outer housing can be routed. To finish
off, re-assemble the rocker link and shock. When assembling, take note to use the correct thread locker and
let it set sufficiently. Please also check the torque used.
We recommend routing the gear cable and brake
line around the left of the head tube as shown in
the figure. This reduces cable rub on the frame
and ensures you can freely turn the bars.
Cable routing for front derailleur
To attach the cable housing, you will find
special mounting tabs on the bottom of
the top tube.
Proceed as follows: Sharply bend a zip
tie about 10 – 15 mm behind the tip to
create a shape close to a hook. Now
insert the hooked zip tie into the cable
mounting tabs. Make sure you insert
only far enough so the tip just snaps
over the cross bridge.
By pulling and pushing, you can direct
the zip tie all the way through until the
head contacts the top tube. Now you can
install the cable housing (and the
optional cable housing for an adjustable
seat post).
Note: only pull the zip tie tight by hand!
