Build restrictions for the Liteville 601 Frame
Please be aware, not all parts available on the market can be used on the Liteville 601 frame and some parts
simply should not be used! The following parts have restrictions:
Suspension forks
Ensure, that when the fork is fully compressed, the fork brace does not touch the head tube. Take special
note when using the 1.5° headset cups in the slack setting. Forks we are aware of with restricted compatibility
are Fox 32 (all year models / 26”)
check space
The factory travel setting of the 601 is 190mm. Recommended are suspension forks of at least 160mm travel.
The Liteville 601 has no restrictions for use with triple crown forks.
Note: we have built a fork stop into the inside of the down tube. This fork stop protects the down tube against
dents from the triple crown fork in case of a crash.
Cranks / bottom bracket
look for space
Not all available crank/bottom bracket
units can be used. The bottom bracket
shell uses a BSA thread and 73mm
width. Make sure the cranks do not colli-
de with the chain stays and with the SCS
chain guide on the right hand side. When
using a Shimano front derailleur, ensure
it is an E-Type derailleur and an E-Type
compatible BB is used.
2
