24
LPP PetRoL GeNset oPeRAtoRs' hANdbook
shUttING the GeNeRAtoR off
1. Remove entire electrical load.
2. Let the engine run for a few minutes at
no load.
3. Move the engine switch to the “OFF”
position (or “ STOP” position 1)
(Turn the key switch to “OFF” or “STOP”
on electrical start models).
4. Do not leave the generator until it has
completely stopped.
5. Close the fuel shut off valve if the engine
is to be put in storage or transported.
6. If cover is used, do not install until unit
has cooled.
bReAk-IN PRoCedURe
Controlled break-in helps insure proper engine and generator operation. Follow
engine procedure outlined in engine manual.
CAUtIoN
Do not apply heavy electrical load during break-in period (the first 2 to 3
hours of operation).
