Lissmac SBM-XS 300 G1E1 ALU MIX, Operating Manual, Page: 8 / 53

Safety
8 Grinding machine SBM-XS 300 G1E1 ALU MIX
2 Safety
2.1 Safety instructions
The SBM-XS 300 G1E1 ALU MIX grinding machine is constructed according to
the state of the art and recognised technical safety rules. However, during its
use, danger for persons and property damage can occur.

The machine is to be used only for intended use in technically faultless
condition and in observance of safety instructions.
2.2 Organisational measures
Personnel authorised to work on the machine must have read and understood
the operating manual before starting work. This applies notably to personnel
who only work occasionally on the machine, e.g. for changeovers and service.

The operating manual is to be kept permanently at the machine location and
easily accessible.

Perform checks for safe and hazard awareness work by operators while
following the operating manual.

If necessary or required by country-specific regulation, use personal
protective clothing (e.g. work gloves, safety glasses, hearing protection).

Observe all safety and danger instructions on the machine.

Keep all safety instructions and danger warnings on the machine complete
and in legible condition.

No changes, removal or addition of parts to the machine without the written
approval of the manufacturer.

Only use original replacement parts from the manufacturer.

Keep intervals for service work which are given in the operating manual.