Rev: 05.20.2022
Page 3
CCD-0001745
Safety
Read and fully understand all instructions before servicing or troubleshooting this system. Adhere to all
safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the LCI limited warranty.
Use of the Ground Control® 3.0 leveling system to support the 5th Wheel for any reason other than which it
is intended is prohibited by Lippert’s limited warranty. The Lippert leveling system is designed as a
“leveling” system only and should not be used to provide service for any reason under the 5th Wheel such
as changing tires or servicing the leveling system. Any attempts to change tires or perform other service
while the 5th Wheel is supported by the Ground Control 3.0 leveling system could result in damage to the
5th Wheel and/or cause death or serious personal injury.
the "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death or serious personal injury if not performed safely and within the parameters set forth in
this manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury
and/or severe product and property damage, including voiding of the component warranty.
trailer MUSt be supported per manufacturer's recommendations before working underneath.
Failure to do so may result in death or serious personal injury.
the "CAUtIoN" symbol above is a sign that a procedure has a safety risk involved and may cause
personal injury, product and/or property damage if not performed safely and within the parameters
set forth in this manual.
Always wear eye protection when performing service, maintenance or installation procedures.
other safety equipment to consider would be hearing protection, gloves and possibly a full face
shield, depending on the nature of the task.
All electrical wiring harnesses shall be loomed and secured to prevent possible damage and
installed in accordance with RVIA electrical standards.
