Operating instructions
Reversing harrow UF 70L/ 80L/ 90L/ 100L
16 - 24
LIPCO 110037B-20-E BA UF70L_80L_90L_100L / 29.12.2009
10. Maintenance
When working on the machine, make sure that the machine is
secured against unintentional tilting! When working with the unit
lifted, always ensure mechanical protection by means of adequate
supporting elements!
Steps to be carried out in order to maintain the machine in good
working condition:
Grease the roller bearings (Fig. 7).
Lubricating points:
Lubricating nipples on both
ends of the roller
Fig. 7
Check the oil level in the angular gear (Fig. 8). Oil level 2-3 cm in
horizontal gear drive position. The first oil change should be
carried out after 30 to 50 operating hours. Further oil changes
after every 200 operating hours or once a year. Use gear oil SAE
90. (Amount of oil 0.3 L)
Angular gear:
Oil plug
Oil gauge glass
Fig. 8
Summary of Contents for Reversing Harrow UF 100L
Page 24: ...Design mail bauer ib com...
