Step 2:
Place your child in the safety seat (Fig. 2).
Step 3:
Fasten the 3-point car seat belt in a way so that the
clasp is in the car buckle on the other side of the safety seat.
Run the lap belt so that it passes under both armrests. Make sure
it is not twisted and runs low enough, in order to support the pelvis.
When inserting the clasp in the buckle you will hear a “click”
sound.
Step 4:
Run the shoulder belt through the guide on the side of
the headrest. Ensure that it is not twisted. Tighten the shoul
-
der belt in the direction shown in the Figure 3 (in the direction
of automatic retraction) as much as possible (Fig. 4).
The Figure 6 shows the correct position of the seat belt buckle in relation to the safety seat.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
EN
