Step 3:
Turn the seat so that you can see the front and care
-
fully pull the two straps (and their pads) towards you so as
to remove them completely from the slots in the backrest of
the seat (Fig. 3).
Step 4:
Then carry the straps back through the slots in the
backrest located at the level appropriate for your child.
Step 5:
Turn the seat again, so that you can see its rear, and
attach the two straps to the strap connector.
Make sure the height of the shoulder straps is correct and
they are not twisted.
4.2 Installation of the safety seat in a car (group I)
Step 1:
In a car equipped with 3-point seat belts, place the
safety seat on the car seat in a way so that the flat surface of
the backrest of the safety seat rest tightly against the vehicle
seat (Fig. 1).
Fig. 3
Fig. 4
EN
