Lionel Union Pacific ALCo PA, Owner'S Manual

Page: 13 / 48

W hen you press AUX1 on your CAB-1 Remote Controller, you
turn the numeric keypad into ten command buttons. The
keypad lets you control extra command features (until you press any
top-row button like
SW , ACC , RTE , TR , or ENG ). The CAB-1
Remote Controller keypad overlay included with this locomotive set
will help you learn the extra features specific to these units.
RailSounds sound system effects are in bold italic.
CAB-1 Remote Controller numeric keypad commands for your
locomotive set
TrainMaster Command operations
DIESEL
ENGINE
RESET
VOLUME
SMOKE
RPM
S
SHUT
CREW
TALK
TOWER
COM
DOWN
OFF ON
➠
➠
➠
➠
START-UP
0
Stops and resets the locomotive set.
Resets the locomotive set’s direction to
FORWARD. Resets the RailSounds sound
system to automatic RPM operation.
Horn blows, and the headlight
will flicker. RPMs return to
automatic.
1 Raises the volume of the RailSounds
sound system.
Sound volume
increases.
2
CrewTalk
communication is the
sound of unintelligible walkie-talkie
communication.
3 Raises the RailSounds sound system
RPM level. Starts-up the RailSounds
sound system.
RPMs increase.
Start-up sequence commences.
4
Lowers the volume of the RailSounds
sound system.
Sound volume
decreases.
5 Activates the RailSounds sound system
shutdown sequence. Just like the real
thing,
your locomotive set ’s RPMs must
be at idle for shutdown to occur. Press
6 repeatedly to lower RPMs until they
won’t descend further. Your locomotive
is now at idle. Press
5 to initiate the
shutdown sequence, following the
CrewTalk communication sounds.
CrewTalk communication,
Diesel shutdown commences.
Remember, the horn, bell, and RPMs
will not sound until you
restart the
RailSounds sound system.
6
Lowers the RailSounds sound system
RPM level.
RPMs decrease.
7 TowerCom announcements are
audible announcements that include
the locomotive’s road number and/or
name. Pressing
7
the first time after
pressing AUX1 triggers a “hold for
clearance” announcement. Press 7
again, and a “clear for departure”
message plays.
There is a four second
delay in this function .
8 Turns smoke off.
Air release sounds.
9 Turns on the smoke generator. Press and
hold
9 (ten seconds maximum) to
initiate Smoke Boost — this superheats
the smoke generator and enhances
smoke output when you start running
your diesel engine. See notes on filling
or turning off the smoke generator on
page 18.
Air release sounds.
AUX1 , 8 and 9 work only if the smoke unit switch is in the ON position.
Note!
13