3
Table of contents
Transformer operations
Running your set with a Lionel transformer
4
Locking your powered locomotive into a single operational state
5
Using your powered and non-powered locomotives’ ElectroCouplers in the
non-Command environment
6
Installing a Lionel Sound Activation Button
7
RailSounds operations
Your locomotive’s RailSounds system—the basics
8
Experiencing the range of your non-powered locomotive’s RailSounds system
9
Notes on RailSounds
9
TrainMaster Command operations
The Command Control environment
10
Running your locomotive in the TrainMaster Command environment
11
CAB-1 commands for your locomotives
11
CAB-1 numeric keypad commands for your locomotives
12
Tuning your locomotives’ performance
13
Assigning your locomotives a new ID#
14
Reprogramming the Command reverse unit to restore features
15
Maintaining and servicing your locomotive
Lubricating your locomotives
16
Lubricating the Pullmor motor armature bearings
17
Replacing the traction tires
18
Replacing your powered A-unit’s lamps
19
Replacing your non-powered B-unit’s lamps
20
Rolling stock operations
Operating the Searchlight car
21
Programming the Searchlight car
21
Replacing the searchlight lamp
22
Replacing the driving washing
22
Operating you Barrel Car
23
Replacing the caboose’s interior lamp
23
Limited Warranty/Lionel Service
24
The following Lionel marks may be used throughout this instruction manual and are protected under
law. All rights reserved.
Lionel
®
, TrainMaster
®
, Odyssey
®
, RailSounds
®
, CrewTalk
™
, TowerCom
™
, DynaChuff
™
,
StationSounds
™
, Pullmor
®
, ElectroCoupler
™
, Magne-Traction
®
, CAB-1 Remote Controller
®
,
PowerMaster
®
, Lionel ZW
®
, ZW
®
, PowerHouse
®
, TMCC
®
, Lionelville
™
, Lockon
®