Figure 8. B-unit lamp replacement
Maintaining and servicing your locomotive
20
Replacing your non-powered B-unit’s lamp
Y
our non-powered B-unit is illuminated
by one 14-volt lamp. During the course
of normal operations, this lamp may
require replacement.
Start by separating the plastic body shell
from the frame; remove the front and rear
screws at each end of the body and lift the
body off the frame.
The lamp rests in a holder, with its prongs
plugged into a socket. Carefully pull the
bulb straight out of the holder to remove it.
Replace the expired lamp with Lionel part
no. 610-8049-300, available from your
Lionel authorized Service Center or Lionel
Service. (For more information, see Lionel
Service on page 24.)
Insert the replacement lamp’s prongs into
the socket, making sure of a tight
connection. To reinstall the shell, line up
the screw holes at each end and reinsert the
screw. Make sure all of the wires are inside
the body before you tighten the screw.
Lionel part no. 610-8049-300
