W
hen you press AUX1 on your CAB-1, you turn the numeric
keypad into ten command buttons. The keypad lets you control
extra command features (until you press any top-row button like
SW
,
ACC
,
RTE
,
TR
, or
ENG
).
RailSounds effects in bold italic.
The sounds are inside the non-powered unit.
CAB-1 numeric keypad commands for your locomotives
TrainMaster Command operations
DIESEL
ENGINE
RESET
VOLUME
CAB
RPM
S
SHUT
CREW
TALK
TOWER
COM
DOWN
OFF
ON
➠
➠
➠
➠
START-UP
AUX1
0
Stops and resets the locomotives. Resets
the locomotive’s direction to
FORWARD. Resets RailSounds to
automatic RPM operation.
Horn
blows. RPM’s return to
automatic.
1
Raises the volume of RailSounds.
Sound volume increases.
2
CrewTalk
is the sound of unintel-
ligible walkie-talkie communication.
3
Raises the RailSounds RPM’s level.
Starts up RailSounds.
RPM’s
increase. Start-up sequence
commences.
4
Lowers the volume of RailSounds.
Sound volume decreases.
5
Activates the RailSounds shutdown
sequence. Just like the real thing,
your
locomotive’
s
RPM’s must be at idle
for shutdown to occur.
Press
6
repeatedly to lower the RPM’s until
they won’t descend further. Your
locomotive is now at idle. Press
5
to
initiate the shutdown sequence and
listen for the CrewTalk sound.
CrewTalk sounds, Diesel
shutdown commences.
Remember, the horn, bell, and RPM’s
will not sound until you
restart
RailSounds by pressing
3
.
6
Lowers RailSounds RPM level.
RPM’s decrease.
7
TowerCom
is an audible two-part
announcement that includes that
engine’s road number and/or name.
Pressing
7
the first time triggers a
“hold for clearance” announcement.
Press
7
again, and a “clear for
departure” message plays.
There is a
four second delay in this function
.
8
Turns off cab interior light (in the
powered A-unit).
Air-release
sounds.
9
Turns on cab interior light (in the
powered A-unit).
Air-release
sounds.
12
