Stem
Looking down at the handlebars,
ensure that the stem is in line with
the front wheel and the minimum
insertion line is not visible. Once it
is, tighten the 6mm bolt securely.
Torque Requirement: 20-23Nm.
To make sure that the stem is
tightened enough, hold the front wheel
in place and twist the handlebars.
If the handlebars move, re-align the
stem and tighten the bolt to spec.
Handlebar
Looking at the handlebars from the
side, ensure that the handlebars are
level with the ground. Once they
are, tighten the 6mm bolt securely.
Torque Requirement: 16-22Nm
To make sure that the handlebars are
properly tightened, lean down on them
with significant pressure. If they move,
loosen the 6mm bolt, reposition the bar
and re-tighten the bolt to spec.
Final Check
Saddle
Set saddle height slightly below
your hips. Tighten seatpost clamp.
Torque Requirement: 4.5-6Nm.
Make sure saddle clamp is tightened.
Torque Requirement: 20-27Nm.
Wheels
Check front and rear axle nuts for
tightness.
Torque Requirement:
30-45Nm.
General
Test ride your Linus to ensure that
the hub is shifting correctly, that
the brakes are engaging quickly
and securely, and the fenders and
chain guard do not rub or make
unnecessary noise.
10
