Page 5.608
REVISION 14: MAJIK and WAKONDA
Sept 95
Copyright © 1995 by Linn Products Limited. All Rights Reserved.
MAJIK-IP only:
Move shorting link to change
from MM to MC.
MAJIK
Board revision L 4 and L 5.
To customise fit Shorting Links
(Linn Part Number CONN 421) as shown:
1
Display ON all the time.
2
Start volume 15
(factory setting 30).
Please note:
Last four pins not used.
Board Revision 5 only:
3.
Fit 2 links to disable Power
amplifier. (Power save mode )
MAJIK
From Board revision L6 upward
To customise fit Shorting Links
(Linn Part Number CONN 421) as
shown:
1 & 2 Disable the power-AMP.
(Power save mode )
3.
Display ON all the
time.
4.
Start volume 15
(factory setting
30).
Please note:
Last two pins not used.
MAJIK-IP only:
Move shorting link
to change from
MM to MC.
CONFIGURING THE MAJIK