![background image](http://html1.mh-extra.com/html/linn/majik/majik_service-manual_1925487006.webp)
Page 5.606
REVISION 14: MAJIK and WAKONDA
Sept 95
Copyright © 1995 by Linn Products Limited. All Rights Reserved.
INTRODUCTION
EXPANSION We designed the MAJIK and WAKONDA to last for many
years and to give your customers unique opportunities to extend their
capabilities as needs evolve and resources allow. At the rear of the MAJIK,
there is an expansion slot, known as the SNEAKY slot, into which one of a
range of SNEAKY add-on modules may by fitted:
A SNEAKY KUDOS tuner module for high-quality radio reception.
A SNEAKY AKTAMP active crossover board which, with additional ampli-
fiers can be used to drive Aktiv speakers.
SNEAKY KNEKT Either a Line Driver module which will expand the MAJIK
/ WAKONDA into the heart of a multi-room system feeding other rooms in
the house or a Local Receiver module could be fitted so that the MAJIK /
WAKONDA can integrate with a Linn multi-room system elsewhere in the
house.
PROBLEMS Rarely, some types of computer monitors and high-frequency
or low-energy fluorescent lights can affect the infra-red control range of the
MAJIK, or make it behave erratically. Such problems are very rare and your
retailer will advise on a solution.
MAINTENANCE
FUSE PROTECTION A fuse is fitted to the power input socket on the rear
of the MAJIK. The fuse holder also contains one spare fuse.
The Linn MAJIK amplifier is designed for a long life and any servicing should
be carried out by an authorised retailer.
CLEANING Dust or finger marks can be removed using a soft damp cloth.
Avoid the use of domestic cleaning products.
Notes:
1.
KUDOS:
When fitting the KUDOS SNEAKY the display sleep function must be
disabled on the MAJIK main board. The KUDOS then controls this
function and cannot be configured to remain on.
2.
MULTI-ROOM:
If using the Majik in a Multiroom system with an RCU in the same room
you will need to disable the IR receiver in the Majik. This is simply done
by fitting a Link across pins which are located in the Sneaky Board and
are clearly marked.
3.
SNEAKY SLOT:
Always disconnect the MAJIK/WAKONDA from everything,
ESPECIALLY MAINS, before fitting a SNEAKY module or carrying
out any configurations.