TECHNICAL SPECIFICATIONS
Majik 126
6
Features
Drive unit
Output Power
Operating volume
Internal Frequency Response
High Pass Filtered Output
Frequency Response
Audio Connections
Line Input Impedance
Parameter Adjustment
Magnetic shielding
Protection
Mains Input voltage
(auto-sensing)
Mains Supply Frequency
Standy Power Consumption
Dimensions
Weight
Standard finishes
Active bass loudspeaker. 500 W RMS built-in amplifier incorporating Chakra technology. Adjustable 2nd order
roll-off for seamless system integration. 25 litres operating volume. Signal sensing auto switch on/off for energy
conservation.
254 mm (10”)
500 W RMS, 1000 W PEAK
25 litres
Adjustable roll-off from 55 Hz - 130 Hz in 3 steps and flat (to allow external low pass filtering). Default is 55 Hz
Adjustable from 10 Hz - 235 Hz in 9 steps. Default is 10 Hz.
Line level audio input RCA phono (A IN)
Line level audio loop out RCA phono (AL OUT)
Line level high pass output RCA phono (HP OUT)
18 k Ω
- 4 step internal low pass frequency @ 55, 85, 130 Hz and flat
- 6 step internal high pass frequency from 18 Hz - 40 Hz
- 9 step external high pass frequency fro 10 Hz - 235 Hz
- Gain adjustable 34 dB in 1 dB steps (-15 to +19 dB)
- 3 step Bass equalisation
- 4 step Time out (standby time after signal end), including 'Always On'
Yes
Fully protected against overload, temperature, full short circuit and overdrive
100 - 120 V
220 - 240 V
50 - 60 Hz
9 W
H 391 mm (including feet) x W 360 mm x D 381 mm
H 15.4 inches (including feet) x W 15 inches x D 14.1 inches
19 kg / 41 lbs 14 oz
White, Maple, American Cherry, Black Ash
Pitch-accurate bass reinforcement loudspeaker with integral active amplification and equalisation circuitry.
