![background image](http://html1.mh-extra.com/html/linn/majik-126/majik-126_owners-manual_1925622009.webp)
Majik 126
Connecting
Connect the Majik 126 speaker to a mains supply using the mains lead
provided.
IMPORTANT:
Do not turn on the mains supply until you have connected all other components.
Connecting to a Linn System Controller or other AV processor
Connecting to a stereo pre-amplifier
if used with large (full-range
frequency response) speakers, for example Majik 140 or 109 speakers.
Connecting to a stereo pre-amplifier and power amplifier
if used with ‘small’
(limited bass response) speakers.
Connecting to another Majik 126 speaker
Note:
In the above configuration the Majik 126 speaker is being used to stop low
bass notes from being sent to the main speakers.
FROM LINN SYSTEM CONTROLLER
OR OTHER AV PROCESSOR
HP OUT
AL OUT
A IN
FROM STEREO PRE-AMP
HP OUT
AL OUT
A IN
FROM STEREO PRE-AMP
TO POWER AMPLIFIER
HP OUT
AL OUT
A IN
FROM LINN SYSTEM
CONTROLLER
OR OTHER
AV PROCESSOR
MAJIK 126 - ONE
MAJIK 126 - TWO
HP OUT
AL OUT
A IN
HP OUT
AL OUT
A IN
FROM
STEREO
PRE-AMP
FROM
STEREO
PRE-AMP
MAJIK 126 - ONE
MAJIK 126 - TWO
HP OUT
AL OUT
A IN
HP OUT
AL OUT
A IN
OR
3