Page 8 of 12
NTI AG / LinMot
CC-Link IE Field Basic\ Parameter Channels
Default value
Channel 8 UPID
Defines the source variable by
UPID of the parameter channel 8.
0
3.2 VARIABLES
Name
Type
Definition
Main State
UInt16 Enumerator
Main State of CC-Link IE FB
Interface SW
Error State
UInt16 Enumerator
Error State of CC-Link IE FB
Interface SW
Error Code
UInt32
Error Code of CC-Link IE FB
Interface SW
Error Location
UInt32
Error Location of CC-Link IE FB
Interface SW
IP Address / StationID
String
Active IP address for CC-Link IE
FB.
NetMask
String
Active NetMask for CC-Link IE FB.
Default Gateway
String
Active Default Gateway for CC-Link
IE FB.
Config Module Control
UInt16
Current Value of Config Module
Control
Config Module Index In
UInt16
Current Value of Config Module
Index In
Config Module Value In
UInt32
Current Value of Config Module
Value In
Config Module Status
UInt16
Current Value of Config Module
Status
Config Module Index Out
UInt16
Current Value of Config Module
Index Out
Config Module Value Out
UInt32
Current Value of Config Module
Value Out
4 MAPPING OF PROCESS DATA
The LinMot drive is a CC-Link IE Field Basic slave. To configure it with a CC-Link master, the corresponding
CSP+ file is used. The CSP+ File can be found in the installation directory.
(typically C:\Program Files\LinMot\LinTalk x.x\Firmware\Interfaces\CCLinkIEFB\CSPP)
4.1 Data transmitted to PLC
Data Type
Index
Name
Data Type
RX
-
-
-
MCSW_Variables
RWr
00h
MCSW_StateVar
UInt16
