C1400 Installation Guide
preliminary
5.7 X17 - X18
X17 - X18
RealTime Ethernet 10/100 Mbit/s (not available on -CI Drives)
X18 RT ETH Out
X17 RT ETH In
Specification depends on RT-Bus Type. Please refer to according documentation.
RJ-45
5.8 X7 - X8
X17 - X18
CMD CAN (only available on -CI Drives)
1
2
3
4
5
6
7
8
Do not connect
Do not connect
Do not connect
isolated GND
isolated GND
Do not connect
isolated CAN high
isolated CAN low
Optically isolated CAN Bus.
RJ-45
use twisted pair (1-2, 3-6, 4-5, 7-8) cable for wiring. The built in CAN terminations can be activated by
S5.9. X7 is internally connected to X8 (Pin4, 5, 7 and 8)
5.9 X19
X19
System
1
2
3
4
5
6
7
8
Do not connect
Do not connect
RS232 Rx
GND
GND
RS232 Tx
Do not connect
Do not connect
RJ-45
Use
isolated USB-RS232 converter (Art.-No. 0150-2473)
for configuration over RS232.
Page 12/21
www.LinMot.com
NTI AG / LinMot
®
