Installation Guide Linear Rotary Motors
ENG
Page 32 / 39
PR02-38
NTI AG / LinMot
7.4.1 Dimensions and Technical Data
Material: Steel
Item
For shaft
T
[Nm]
F
ax
[kN]
T
A
[Nm]
D
[mm]
Weight
[g]
RS01-SS10x20
10 mm
19
4
1.2
20
19
T = transmittable torque at Fax = 0.
F
ax
= transmittable axial force at T = 0.
T
A
= fastening torque of the screws.
D = external exposure tolerance.
7.4.2 Mounting
•
The shaft-hub clamping has to sit inside the bore by at least the clamp length (13 mm).
•
Slightly oil the shaft-hub clamping before mounting, do not use molybdenum disulphide
or fat.
•
Tighten screws opposite each other 180 degrees offset in several steps to tightening
torque T
A
(see above for details).
•
By tightening the screws, the inner diameter is reduced and the outer diameter is
increased. This ensures a stable clamping of the outer receptacle.
