2.1.3 Read the Documentation
CAUTION
Read the Documentation
Read the available documentation before installation and commissioning. Improper handling of the servo
motor and linear actuator can cause harm to people or damage to property. The operator must therefore
ensure that all persons entrusted to work on the actuator have read and understood the manual and that
the safety notices in this safety guide are observed.
2.1.4 Qualified Personnel
The 2S safety system described in this documentation may be operated only by personnel qualified for the specific task
(such as storage & transport, commissioning, operation, maintenance, repair, modification, decommissioning or
disposal), in accordance with the relevant documentation, its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, can identify risks and prevent potential
hazards when working with these products/systems.
2.1.5 Intended Use
The products and equipment are designed and intended for specific purpose as described. Each product may only be
used with equipment and under operating conditions described in relevant documentation. Users must be qualified to
handle the devices and be aware of the hazards potentially associated with the process. Some processes may require
the workplace be equipped with additional safety features (such as protective clothing, eyeglasses and gloves) or that
precautions be otherwise taken to protect personnel and working environment. Generally, all country and industry-
specific statutory or otherwise mandatory laws and regulations apply. Safety and warning instructions given in this
document only apply to the product or equipment or devices and supplement the rules and regulations the operator
stipulates at the workplace for the respective process. The user is solely responsible for applications, which go beyond
the intended use described here and for each individual product or equipment or device, which are not described in
instructions sets. Company does not accept any liability beyond the intended usage.
Furthermore, individual restrictions and product or equipment or device specifications in the offer description from the
manufacturer also found in the delivery contract and such warranty terms also apply. Intended use also means that all
specifications in these instructions must be followed. Any use beyond the intended use is considered to be misuse.
2.1.6 Prohibited Use
Commissioning the motor is prohibited if the machine, in which it was installed,
does not meet the requirements of the EC Machinery Directive,
does not comply with the EMC Directive,
does not comply with the Low Voltage Directive.
2S Drive Systems / 0185-1174_E_1V1_SM_C1251-2S / NTI AG
0185-1174_E_1V1_SM_C1251-2S / 2021-11-26 16:43 (Rev. 12500)
Page 15 of 150