24
Chapter 5: Using the Wireless Network Monitor
Create a New Profile
Wireless-G USB Network Adapter with RangeBooster
WEP Key
- The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption,
enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters.
Valid hexadecimal characters are “0” to “9” and “A” to “F”.
Then click
Connect
and proceed to Step 3.
If your network has the wireless security WPA Personal (Wi-Fi Protected Access) enabled, this screen will
appear.
Encryption
- Select the type of algorithm you want to use,
TKIP
or
AES
,
from the
Encryption
drop-down
menu.
Passphrase
- Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the
Passphrase
field.
Then click
Connect
and proceed to Step 3.
If your network has the wireless security PSK2 (Pre-shared key 2) enabled, this screen will appear.
Passphrase
- Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the
Passphrase
field.
Then click
Connect
and proceed to Step 3.
3. After the software has been successfully installed, the
Congratulations
screen will appear. Click
Connect to
Network
to connect to your network, implement the new settings, and return to the
Link Information
screen.
Congratulations! The profile has been successfully configured.
Figure 5-2: WPA - Personal Needed for Connection
Figure 5-3: PSK2 Needed for Connection
Figure 5-4: Congratulations
Summary of Contents for WUSB54GR
Page 61: ...55 Appendix H Regulatory Information Wireless G USB Network Adapter with RangeBooster...
Page 62: ...56 Appendix H Regulatory Information Wireless G USB Network Adapter with RangeBooster...
Page 63: ...57 Appendix H Regulatory Information Wireless G USB Network Adapter with RangeBooster...
