Linksys WRT54G-TM User Manual Download | Manualshive

Page: 78 / 84

background image

71

Appendix I: Regulatory Information

Wireless-G Broadband Router

Appendix I: Regulatory Information

FCC Statement

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment or devices

•

Connect the equipment to an outlet other than the receiver's

•

Consult a dealer or an experienced radio/TV technician for assistance

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.

Safety Notices

Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord.

Do not use this product near water, for example, in a wet basement or near a swimming pool.

Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Industry Canada (Canada)

This device complies with Canadian ICES-003 and RSS210 rules.

Cet appareil est conforme aux normes NMB-003 et RSS210 d'Industry Canada.

«
...
76
77
78
79
80
...
»

Summary of Contents for WRT54G-TM





















































































Reviews:

No comments

Related manuals for WRT54G-TM

Brand: D-Link Pages: 12

Ethernet Broadband Router DIR-100

Brand: D-Link Pages: 70

Brand: D-Link Pages: 74

Brand: D-Link Pages: 76

myPocket DIR-457

Brand: D-Link Pages: 4

Monitouch V9 Series

Brand: Hakko Electronics Pages: 16

Brand: TCL Pages: 22

Brand: Ebyte Pages: 11

Brand: Konig Pages: 2

Brand: Erbauer Pages: 36

Brand: Youwon Pages: 4

Brand: Air Live Pages: 2

Brand: Air Live Pages: 103

Air Live WL-5470AP

Brand: Air Live Pages: 135

Brand: AzureWave Pages: 48

Brand: AUDICTUS Pages: 13

Brand: Proxim Pages: 72

Brand: ConnectGear Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands