Linksys WRT54G-TM User Manual Download | Manualshive

Page: 52 / 84

background image

45

Appendix A: Troubleshooting
Common Problems and Solutions

Wireless-G Broadband Router

“Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting
an IP address.

5. Once completed with the configuration, click the

Save Settings

button.

8. I forgot my password, or the password prompt always appears when I am saving settings to the

Router.

Reset the Router to factory default by pressing the Reset button for 10 seconds and then releasing it. If you
are still getting prompted for a password when saving settings, then perform the following steps:

1. Access the Router’s web-based utility by going to http://192.168.

0

.1 or the IP address of the Router.

Enter the default password admin, and click the Administration => Management tab.

2. Enter a different password in the

Router Password

field, and enter the same password in the second

field to confirm the password.

3. Click the

Save Settings

button.

9. I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.

If you have proxy settings, you need to disable these on your computer. Because the Router is the gateway for
the Internet connection, the computer does not need any proxy settings to gain access. Please follow these
directions to verify that you do not have any proxy settings and that the browser you use is set to connect
directly to the LAN.
•

For Microsoft Internet Explorer 5.0 or higher:

1. Click

Start,

Settings

, and

Control Panel

. Double-click Internet Options.

2. Click the

Connections

tab.

3. Click the

LAN settings

button and remove anything that is checked.

4. Click the

OK

button to go back to the previous screen.

5. Click the option

Never dial a connection

. This will remove any dial-up pop-ups for PPPoE users.

•

For Netscape 4.7 or higher:

1. Start

Netscape Navigator

, and click

Edit

,

Preferences

,

Advanced

, and

Proxies

.

2. Make sure you have Direct connection to the Internet selected on this screen.
3. Close all the windows to finish.

To start over, I need to set the Router to factory default.

Hold the Reset button for 10 seconds and then release it. This will return the password, forwarding, and other
settings on the Router to the factory default settings. In other words, the Router will revert to its original
factory configuration.

.

10. I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download
the latest firmware at www.linksys.com.
Follow these steps:

1. Go to the Linksys website at http://www.linksys.com and download the latest firmware.
2. To upgrade the firmware, follow the steps in “Appendix C: Upgrading Firmware.”

11. The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or
make the Power LED stop flashing:

«
...
50
51
52
53
54
...
»

Summary of Contents for WRT54G-TM





















































































Reviews:

No comments

Related manuals for WRT54G-TM

Brand: D-Link Pages: 3

Brand: ZyXEL Communications Pages: 2

Brand: NetComm Pages: 3

Brand: sauter Pages: 8

HT-TM01 TripMate

Brand: Hootoo Pages: 47

Brand: Deliberant Pages: 69

Brand: MAKER MADE Pages: 40

Brand: Alfa Network Pages: 1

Brand: Loopcomm Pages: 2

Brand: Dillinger Labs Pages: 16

Brand: AUSounds Pages: 82

Brand: Pepwave Pages: 58

Brand: Pepwave Pages: 76

Brand: Konig Pages: 6

Brand: Xterasys Pages: 52

Brand: Air Live Pages: 9

Brand: EnGenius Pages: 4

Brand: C-Max Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands