Linksys WRT54G-TM User Manual Download

Page: 72 / 84

Appendix F: Glossary

Wireless-G Broadband Router

OFDM

(

rthogonal

requency

ivision

ultiplexing) - Frequency transmission that separates the data stream

into a number of lower-speed data streams, which are then transmitted in parallel to prevent information from
being lost in transit.

Packet

- A unit of data sent over a network.

Passphrase

- Used much like a password, a passphrase simplifies the WEP encryption process by automatically

generating the WEP encryption keys for Linksys products.

PEAP

(

rotected

xtensible

uthentication

rotocol) - A mutual authentication method that uses a combination

of digital certificates and another system, such as passwords.

Ping

(

acket

ternet

roper) - An Internet utility used to determine whether a particular IP address is online.

POP3

(

ost

ffice

rotocol

) - A standard mail server commonly used on the Internet.

Port

- The connection point on a computer or networking device used for plugging in cables or adapters.

ower

ver

thernet (

PoE

) - A technology enabling an Ethernet network cable to deliver both data and power.

PPPoE

(

oint to

oint

rotocol

ver

thernet) - A type of broadband connection that provides authentication

(username and password) in addition to data transport.

PPTP

(

oint-to-

oint

unneling

rotocol) - A VPN protocol that allows the Point to Point Protocol (PPP) to be

tunneled through an IP network. This protocol is also used as a type of broadband connection in Europe.

Preamble

- Part of the wireless signal that synchronizes network traffic.

RADIUS

(

emote

uthentication

ial-

ser

ervice) - A protocol that uses an authentication server to control

network access.

RJ-45

(

egistered

ack

-45

) - An Ethernet connector that holds up to eight wires.

Roaming

- The ability to take a wireless device from one access point's range to another without losing the

connection.

Router

- A networking device that connects multiple networks together.

RTS

(

equest

end) - A networking method of coordinating large packets through the RTS Threshold setting.

Server

- Any computer whose function in a network is to provide user access to files, printing, communications,

and other services.

Summary of Contents for WRT54G-TM





















































































Search results

Summary of Contents for WRT54G-TM

Reviews:

Related manuals for WRT54G-TM

Brands by name

Popular brands

Linksys WRT54G-TM, User Manual

Search results

Summary of Contents for WRT54G-TM

Reviews:

Related manuals for WRT54G-TM

Brands by name

Popular brands