Linksys WRT54G-TM User Manual Download

Page: 69 / 84

Appendix F: Glossary

Wireless-G Broadband Router

Cable Modem

- A device that connects a computer to the cable television network, which in turn connects to the

Internet.

CSMA/CA

(

arrier

ense

ultiple

ccess/

ollision

voidance) - A method of data transfer that is used to prevent

data collisions.

CTS

(

lear

end) - A signal sent by a wireless device, signifying that it is ready to receive data.

Daisy Chain

- A method used to connect devices in a series, one after the other.

Database

- A collection of data that is organized so that its contents can easily be accessed, managed, and

updated.

DDNS

(

ynamic

omain

ame

ystem) - Allows the hosting of a website, FTP server, or e-mail server with a

fixed domain name (e.g., www.xyz.com) and a dynamic IP address.

Default Gateway

- A device that forwards Internet traffic from your local area network.

DHCP

(

ynamic

ost

onfiguration

rotocol) - A networking protocol that allows administrators to assign

temporary IP addresses to network computers by “leasing” an IP address to a user for a limited amount of time,
instead of assigning permanent IP addresses.

DMZ

(

ilitarized

one) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from

the Internet.

DNS

(

omain

ame

erver) - The IP address of your ISP's server, which translates the names of websites into IP

addresses.

Domain

- A specific name for a network of computers.

Download

- To receive a file transmitted over a network.

DSL

(

igital

ubscriber

ine) - An always-on broadband connection over traditional phone lines.

DSSS

(

irect-

equence

pread-

pectrum) - Frequency transmission with a redundant bit pattern resulting in a

lower probability of information being lost in transit.

DTIM

(

elivery

raffic

ndication

essage) - A message included in data packets that can increase wireless

efficiency.

Dynamic IP Address

- A temporary IP address assigned by a DHCP server.

Summary of Contents for WRT54G-TM





















































































Search results

Summary of Contents for WRT54G-TM

Reviews:

Related manuals for WRT54G-TM

Brands by name

Popular brands

Linksys WRT54G-TM, User Manual

Search results

Summary of Contents for WRT54G-TM

Reviews:

Related manuals for WRT54G-TM

Brands by name

Popular brands