background image

AppendixC

Warranty Information

9

RangePlus Wreless Network USB Adapter

Appendx C:  

Warranty Informaton

Limited Warranty

Linksys  warrants  this  Linksys  hardware  product  against 

defects  in  materials  and  workmanship  under  normal 

use for the Warranty Period, which begins on the date of 

purchase by the original end-user purchaser and lasts for 

the period specified below:

One (1) year for new product
Ninety (90) days for refurbished product

This limited warranty is non-transferable and extends only 

to the original end-user purchaser. Your exclusive remedy 

and  Linksys’  entire  liability  under  this  limited  warranty 

will be for Linksys, at its option, to (a) repair the product 

with  new  or  refurbished  parts,  (b)  replace  the  product 

with a reasonably available equivalent new or refurbished 

Linksys  product,  or  (c)  refund  the  purchase  price  of  the 

product  less  any  rebates.  Any  repaired  or  replacement 

products  will  be  warranted  for  the  remainder  of  the 

original Warranty Period or thirty (30) days, whichever is 

longer. All products and parts that are replaced become 

the property of Linksys.

Exclusions and Limitations

This  limited  warranty  does  not  apply  if:  (a)  the  product 

assembly  seal  has  been  removed  or  damaged,  (b)  the 

product has been altered or modified, except by Linksys, (c) 

the product damage was caused by use with non-Linksys 

products, (d) the product has not been installed, operated, 

repaired,  or  maintained  in  accordance  with  instructions 

supplied by Linksys, (e) the product has been subjected to 

abnormal physical or electrical stress, misuse, negligence, 

or accident, (f) the serial number on the Product has been 

altered, defaced, or removed, or (g) the product is supplied 

or licensed for beta, evaluation, testing or demonstration 

purposes  for  which  Linksys  does  not  charge  a  purchase 

price or license fee.
ALL  SOFTWARE  PROVIDED  BY  LINKSYS  WITH  THE 

PRODUCT,  WHETHER  FACTORY  LOADED  ON  THE 

PRODUCT  OR  CONTAINED  ON  MEDIA  ACCOMPANYING 

THE PRODUCT, IS PROVIDED “AS IS” WITHOUT WARRANTY 

OF ANY KIND. Without limiting the foregoing, Linksys does 

not warrant that the operation of the product or software 

will  be  uninterrupted  or  error  free.  Also,  due  to  the 

continual development of new techniques for intruding 

upon  and  attacking  networks,  Linksys  does  not  warrant 

that the product, software or any equipment, system or 

network on which the product or software is used will be 

free  of  vulnerability  to  intrusion  or  attack.  The  product 

may include or be bundled with third party software or 

service offerings. This limited warranty shall not apply to 

such third party software or service offerings. This limited 

warranty  does  not  guarantee  any  continued  availability 

of  a  third  party’s  service  for  which  this  product’s  use  or 

operation may require. 
TO THE  EXTENT  NOT  PROHIBITED  BY  LAW,  ALL  IMPLIED 

WARRANTIES  AND  CONDITIONS  OF  MERCHANTABILITY, 

SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR 

PURPOSE  ARE  LIMITED  TO  THE  DURATION  OF  THE 

WARRANTY  PERIOD.  ALL  OTHER  EXPRESS  OR  IMPLIED 

CONDITIONS,  REPRESENTATIONS  AND  WARRANTIES, 

INCLUDING,  BUT  NOT  LIMITED  TO,  ANY  IMPLIED 

WARRANTY  OF  NON-INFRINGEMENT,  ARE  DISCLAIMED. 

Some jurisdictions do not allow limitations on how long 

an implied warranty lasts, so the above limitation may not 

apply to you. This limited warranty gives you specific legal 

rights, and you may also have other rights which vary by 

jurisdiction.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT 

WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE 

OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, 

INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE 

THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING 

OUT  OF  OR  RELATED  TO  THE  USE  OF  OR  INABILITY  TO 

USE  THE  PRODUCT  (INCLUDING  ANY  SOFTWARE),  EVEN 

IF  LINKSYS  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF 

SUCH  DAMAGES.  IN  NO  EVENT  WILL  LINKSYS’  LIABILITY 

EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. 

The foregoing limitations will apply even if any warranty 

or  remedy  provided  under  this  limited  warranty  fails  of 

its  essential  purpose.  Some  jurisdictions  do  not  allow 

the exclusion or limitation of incidental or consequential 

damages,  so  the  above  limitation  or  exclusion  may  not 

apply to you.

Obtaining Warranty Service

If you have a question about your product or experience a 

problem with it, please go to 

www.lnksys.com/support 

where you will find a variety of online support tools and 

information to assist you with your product. If the product 

proves  defective  during  the  Warranty  Period,  contact 

Linksys  Technical  Support  for  instructions  on  how  to 

obtain warranty service. The telephone number for Linksys 

Technical Support in your area can be found in the product 

User Guide and at 

www.lnksys.com

. Have your product 

serial number and proof of purchase on hand when calling. 

A  DATED  PROOF  OF  ORIGINAL  PURCHASE  IS  REQUIRED 

TO PROCESS WARRANTY CLAIMS. If you are requested to 

return your product, you will be given a Return Materials 

Authorization  (RMA)  number.  You  are  responsible  for 

properly packaging and shipping your product to Linksys 

at your cost and risk. You must include the RMA number 

and a copy of your dated proof of original purchase when 

returning your product. Products received without a RMA 

number  and  dated  proof  of  original  purchase  will  be 

Summary of Contents for WRT160N - Wireless-N Broadband Router Wireless
















































Reviews: