26
Chapter 6: Configuring the Wireless-G Exterior Access Point
The Wireless - Wireless Connection Control Tab
Wireless-G Exterior Access Point
The Wireless - Wireless Connection Control Tab
This screen allows you to configure the Connection Control List to control the connection (association) of
wireless client devices.
Wireless Connection Control
Connection Control
. Choose one of the three options to control the connection (association) of wireless
client devices.
•
Disabled
. The default setting.
•
Prevent
MAC Addresses (specific client devices) from connecting to the Access Point.
•
Allow
MAC Addresses (specific client devices) to connect to the Access Point.
Select MAC Address From Networked Computers
Instead of manually entering the MAC address of each client, the Access Point provides a convenient way to
select a specific client device from the client association table. Click this button and a window appears to let
you select a MAC address from the table. The selected MAC address will be entered into the Connection
Control List.
MAC 1-20
. Enter the MAC addresses of the wireless devices you want to control.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel
Changes
if you don’t want to apply the changes. Help information is displayed on the right side of the
screen.
Figure 6-12: Wireless Security - RADIUS
Figure 6-1: Select MAC Address from Client
Summary of Contents for WAP54GPE - Wireless-G Exterior Access Point
Page 1: ...Model No Exterior Access Point Wireless G WAP54GPE User Guide WIRELESS GHz 2 4802 11g ...
Page 72: ...62 Appendix H Regulatory Information Wireless G Exterior Access Point ...
Page 73: ...63 Appendix H Regulatory Information Wireless G Exterior Access Point ...
Page 74: ...64 Appendix H Regulatory Information Wireless G Exterior Access Point ...
