5
Chapter 2: Planning Your Wireless Network
Example of a Simple Wireless Network
Wireless-G Exterior Access Point
To link your wired network with your wireless network, connect the Access Point’s Ethernet network port to
any switch or router with Power over Ethernet (PoE)—or a PoE injector, such as the Linksys WAPPOE or
WAPPOE12. Note that 12 VDC on WAPPOE12 is for the splitter output. Both PoE Injectors provide 48
VDC power output.
With these and many other Linksys products, your networking options are limitless. Go to the Linksys
website at
www.linksys.com
for more information about wireless products.
Example of a Simple Wireless Network
Figure 2-1: Example of a Simple Wireless Network
The above diagram shows a typical infrastructure wireless network setup. The Wireless Access Points are
connecting to a Linksys switch that provides power to the Access Points. Each Access Point can connect
multiple wireless devices to the network. This network will provide connectivity among wireless network
devices and PCs that have a wired connection to the switch.
Summary of Contents for WAP54GPE - Wireless-G Exterior Access Point
Page 1: ...Model No Exterior Access Point Wireless G WAP54GPE User Guide WIRELESS GHz 2 4802 11g ...
Page 72: ...62 Appendix H Regulatory Information Wireless G Exterior Access Point ...
Page 73: ...63 Appendix H Regulatory Information Wireless G Exterior Access Point ...
Page 74: ...64 Appendix H Regulatory Information Wireless G Exterior Access Point ...