27
Chapter 4: Using the Console Interface for Configuration
Configuring the Switch through the Console Interface
WebView Switches
Network Configuration
The
Network Configuration
screen offers a choice of two tests, Ping and TraceRoute.
Ping
The
Ping
screen displays the IP address of the location you want to contact.
Select
Edit
to change the IP address, and select
Execute
to begin the ping test.
After the ping test is complete, the
Ping
screen displays the IP address, status, and statistics of the ping test.
Select
Edit
and press the
Enter
key to make changes. When your changes are complete, press the
Esc
key to
return to the
Action
menu. Select
Save
and press the
Enter
key to save your changes. To exit, select
Quit
and
press the
Enter
key.
TraceRoute
The
TraceRoute
screen displays the IP address of the address whose route you want to trace.
Select
Edit
to change the IP address, and select
Execute
to begin the traceroute test.
After the traceroute test is complete, the
TraceRoute
screen displays the IP address, status, and statistics of the
traceroute test.
Select
Edit
and press the
Enter
key to make changes. When your changes are complete, press the
Esc
key to
return to the
Action
menu. Select
Save
and press the
Enter
key to save your changes. To exit, select
Quit
and
press the
Enter
key.
Figure 4-27: Network Configuration
Figure 4-28: Ping Test
Figure 4-29: TraceRoute Test
Summary of Contents for SRW208G
Page 6: ...WebView Switches Appendix G Regulatory Information 125 Appendix H Contact Information 131 ...
Page 138: ...127 Appendix G Regulatory Information WebView Switches ...
Page 139: ...128 Appendix G Regulatory Information WebView Switches ...
Page 140: ...129 Appendix G Regulatory Information WebView Switches ...