Linksys SRW208G User Manual Download Page 104 | Manualshive

Page: 104 / 142

background image

93

Appendix A: About Gigabit Ethernet and Fiber Optic Cabling
Gigabit Ethernet

WebView Switches

Appendix A: About Gigabit Ethernet and Fiber Optic Cabling

Gigabit Ethernet

Gigabit Ethernet runs at speeds of 1Gbps (Gigabit per second), ten times faster than 100Mbps Fast Ethernet, but
it still integrates seamlessly with 100Mbps Fast Ethernet hardware. Users can connect Gigabit Ethernet hardware
with either fiber optic cabling or copper Category 5e cabling, with fiber optics more suited for network
backbones. As the Gigabit standard gradually integrates into existing networks, current computer applications
will enjoy faster access time for network data, hardware, and Internet connections.

Fiber Optic Cabling

Fiber optic cabling is made from flexible, optically efficient strands of glass and coated with a layer of rubber
tubing, fiber optics use photons of light instead of electrons to send and receive data. Although fiber is physically
capable of carrying terabits of data per second, the signaling hardware currently on the market can handle no
more than a few gigabits of data per second.

Fiber cables come with two main connector types. The most commonly used fiber optic cable is multi-mode fiber
cable (MMF), with a 62.5 micron fiber optic core. Single-mode fiber cabling is somewhat more efficient than
multi-mode but far more expensive, due to its smaller optic core that helps retain the intensity of traveling light
signals. A fiber connection always require two fiber cables: one transmits data, and the other receives it.

Each fiber optic cable is tipped with a connector that fits into a fiber port on a network adapter, hub, or switch. In
the USA, most cables use a square SC connector that slides and locks into place when plugged into a port or
connected to another cable. In Europe, the round ST connector is more prevalent.

You must use the Linksys MGBT1, MGBSX1, or MGBLH1 mini-GBIC modules with the Linksys Gigabit Switches.
The MGBSX1 and the MGBLH1 require fiber cabling with LC connectors, and the MGBT1 requires a Category 5e
Ethernet cable with an RJ-45 connector.

«
...
102
103
104
105
106
...
»

Summary of Contents for SRW208G















































































































































Reviews:

No comments

Related manuals for SRW208G

Verizon DSL-2750B

Brand: D-Link Pages: 2

Brand: D-Link Pages: 4

Brand: A-Link Pages: 6

DR-4100P Series

Brand: Idis Pages: 30

Brand: Hawking Pages: 2

Brand: Lancom Pages: 25

RS-232/422/485 Serial Card CE 3PXCC4A

Brand: B&B Electronics Pages: 47

Brand: Valcom Pages: 4

Brand: M86 Security Pages: 309

Brand: AMX Pages: 2

Brand: Caton Pages: 18

Brand: B&B Electronics Pages: 2

Brand: TP-Link Pages: 4

Brand: Rosco Pages: 20

Brand: ZyXEL Communications Pages: 12

MSR-20-21 ROUTER

Brand: H3C Pages: 83

Passport 8608GTE

Brand: Nortel Pages: 10

Brand: National Instruments Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands