15
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation
Wireless-G PrintServer with Multifunction Printer Support
15. If your network uses wireless security, you will prompted to enter the correct information.
If you enter a Passphrase, you will see the automatically generated WEP key on the following screen.
Otherwise, enter the WEP key manually in the field provided. If you are using 64-bit WEP encryption, then the
key must consist of exactly 10 hexadecimal characters. If you are using 128-bit WEP encryption, then the key
must consist of exactly 26 hexadecimal characters. Valid hexadecimal characters are “0”-“9” and “A”-“F”.
Click
Next
to continue, or click
Back
to return to the previous screen.
Figure 4-15: Wireless Security Settings - Disabled
Figure 4-16: Wireless Security - WEP