16
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation
Wireless-G PrintServer with Multifunction Printer Support
WPA-Pre-Shared Key
Enter a Pre-Shared Key that is 8-63 characters in length. Click
Next
to continue, or click
Back
to return to the
previous screen.
16. The
Confirmation
screen will appear. Your old and new settings will be displayed. If you want to save the new
settings, click
Next
. If you want to make a change, click
Back
to make changes.
Please wait a few moments while the system changes the PrintServer’s settings.
NOTE:
In the next few screens, you will need to disconnect and reconnect your PrintServer. Proceed in the order
specified to avoid any networking conflicts.
Figure 4-17: Wireless Security - WPA-Pre-Shared
Figure 4-18: Confirm New Settings
