![background image](http://html.mh-extra.com/html/linksys/lapac2600/lapac2600_user-manual_1925219103.webp)
Chapter 5 --- Maintenance
Maintenance
Firmware Upgrade
Go to
Maintenance > Maintenance > Firmware Upgrade
to upgrade the firmware in the wireless
access point by using HTTP/HTTPS, or TFTP.
Check the Linksys support website (
http://www.linksys.com/support
) and download the latest
firmware release to a storage device or PC. Perform the firmware upgrade by following the steps
below.
If an access point works as master of an AP cluster, all slaves within the same cluster will be
updated, as well.
Do not power off the device or disconnect the Ethernet cable during the upgrade. The access
point will reboot automatically after the upgrade is complete.
To perform the firmware upgrade from local PC:
1.
Click
Choose File
to navigate to the location of the upgrade file.
2.
Select the upgrade file. Its name will appear next to the
Choose File
button.
3.
Click
Upgrade
.
To perform the firmware upgrade from TFTP server:
1.
Enter the IP address of the TFTP server and the source file. The source file is the firmware
filename you stored in your TFTP server. Only IPv4 addresses are supported.
2.
Click
Upgrade
.
103
Summary of Contents for LAPAC2600
