System Summary
Device SKU
The SKU is often used to identify device model number
and region.
Firmware Version
The version of the firmware currently installed.
Firmware
Checksum
The checksum of the firmware running in the access
point.
Hardware Version
The version of the hardware.
Local MAC
Address
The MAC (physical) address of the wireless access
point.
Serial Number
The serial number of the device.
Host Name
The host name assigned to the access point.
System Up Time
How long the system has been running since the last
restart or reboot.
System Time
The current date and time.
Power Source
The power source of the access point. It can be Power
over Ethernet (PoE) or Power Adapter. When two power
sources are plugged in, Power Adaptor will be
displayed.
LAG Status
Indicates the status of LAG (Link Aggregation). It can
be "Inactive" or "Active"
•
When LAG is inactive, only one Ethernet port
works at a given time.
•
LAG only works when link speed and duplex of
the two Ethernet ports are the same and duplex
must be Full. LACP does not support half-
duplex.
•
LAG is based on 802.3ad LACP (Link
Aggregation Control Protocol) so it works only
when link ends of the two Ethernet ports of the
Access Ports also support 802.3ad LACP and
enable it.
93
Summary of Contents for LAPAC2600
