EtherFast
®
Managed 24-Port with Dual Gigabit Switch
Static ARP Table
The Static ARP Table screen is used to specify the static Address
Resolution Protocol.
• IP Address - IP address statically mapped to a physical MAC address.
• MAC Address - MAC address statically mapped to the corresponding
IP address.
• Interface - The index number of the IP interface that will use this static
ARP entry. (Port “0” refers to the CPU.)
Select Apply to make changes. Select OK to return to the previous panel.
Select Prev Page to view the previous page. Select Next Page to view the
next page. To display a specific page, set the page number in the Page field
and then press Apply. Select Add to add a static ARP entry.
55
EtherFast
®
Series
BOOTP Relay Database Configuration
The BOOTP Relay Database Configuration screen allows you to
specify the IP address for a BOOTP relay server.
• Index Server Address - Used to define any preferred DHCP
servers or the outbound subnetwork for relaying a DHCP request
broadcast. (Up to five entries are permitted.)
Select OK to return to the previous panel. Select Add to add another entry.
Add BOOTP Relay Server
The Add BOOTP Relay Server screen allows you to add an entry.
• IP Address - IP address of server.
Select OK to return to the previous panel. Select Cancel to cancel any
changes.
54
