EtherFast
®
Managed 24-Port with Dual Gigabit Switch
Bridge Menu
The Bridge Menu is used to configure settings for the Spanning Tree
Algorithm, as well as the global bridge settings for GMRP (GARP Multicast
Registration Protocol) and GVRP (GARP VLAN Registration Protocol), traf-
fic classes priority threshold, and address aging time.
• Bridge Configuration - Contains global bridge settings for STA (includ-
ing bridge priority, hello time, forward delay, maximum message age),
GMRP, GVRP, traffic class priority threshold, and address aging time.
• Spanning Tree Port Configuration - Contains STA settings for individual
ports, including port priority, path cost, and fast forwarding.
Select OK to return to the previous panel.
41
EtherFast
®
Series
Add Multicast Address Entry
The Add Static Address Entry screen allows you to add static
addresses for multicasting.
• VLAN - The VLAN corresponding to this multicast service.
• Address - The destination MAC address for a multicast service.
• Port - The ports to which this multicast traffic can be forwarded.
Read the numbers vertically; they range from 1-26. For each port
number, there are two choices: “M” or nothing. Use the spacebar to
scroll through the choices.
Select the letter “M” to indicate that the VLAN has access to mes-
sages transmitted by that particular port.
Select a blank space to indicate that there is no access to messages
transmitted by that particular port.
Select OK to confirm the changes. Select Cancel to cancel any changes.
40
