![background image](http://html1.mh-extra.com/html/linksys/efr240/efr240_user-manual_1924485016.webp)
Instant RAID
1. Select
the
Start button and go to Settings. From here, select Network
and Dial-Up Connections. Click the Local Area Connections # and
select Properties.
2. Be sure to check the following components listed in this window:
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
3. Check with your network administrator to be sure this is properly config-
ured or use the setting shown below.
27
Linksys EtherFast
®
Series
26
2. Locate the Instant RAID, as shown above. If it is not listed, double-click
Entire Network. Then double-click the Workgroup that the RAID is in.
(By default, the RAID is in Workgroup.)
3. Double-click the Instant RAID icon.
4. Right-click a RAID folder (share) to which you have access, and select
Map Network Drive, as shown below.
5. Select a drive letter for this folder, and check the Reconnect at Logon
checkbox. (If you don’t choose to reconnect, the mapping will be lost
when you shut down your PC.) Click OK.
6. This drive will now be available in Windows Explorer, and from the
File-Open or File-Save As function in all Windows applications.
When you try to access a folder, you may be prompted for a password.
If your Windows logon name is the same as your Instant RAID user
name, but the passwords are different, you can enter you Instant RAID
password now.
If your Windows logon name does not exist on
the Instant RAID, you will only have guest
access rights and there is no password which
you can enter at this time.
N
No
otte
e:: When browsing the
Instant RAID using
Windows Explorer or
another file manager, you
may see the following files
which have been generat-
ed by Apple Talk clients:
.Apple Desktop, .Apple
Double, Network Trash
Folder.
Do not delete
these files!
TCP/IP Setup for Windows 2000