B - SAFETY RULES
8695 4387 / H
B-4
EASYTOME
2 - SPECIAL SAFETY RULES
MAINTENANCE CONDITIONS, CONDITIONS OF USE
No object is to be placed on the rolling tracks
For installation or maintenance operations, the operator must use the lifting eyes provided for that
purpose and shown on the drawing (see Handling section).
STABILITY
Do not climb on the cable drag chain.
Before handling plates, make sure that the safety of persons and property is protected.
The machine must be anchored to the floor (see layout paragraph).
Before using the machine, make sure that all the guards are in place.
No maintenance may be carried out on the machine when it is supplied with power.
Switch off the power source while changing the wearing parts of the torch if the plasma process is
being used.
CONDUCTING MAINTENANCE ON PIECES
The equipment for handling workpieces that have been or need to be cut is not part of the supply
and is to be provided by the customer. The customer must therefore take protective measures
appropriate for the equipment for handling the workpieces
CAUTION:
While handling the metal plates to cut, take the necessary
precautions to avoid impacts on the machine and the rolling tracks.
Impacts on these elements could lead to squareness faults and
therefore unsatisfactory cutting.