18
/
27
10.
Serial Communication Protocol
[Network transmission setting]
Baud rate :9600bps
Data Length :8bit
Start Bit :1bit
Stop Bit :1bit
Parity :Non
Xon / Xoff Control :Non
[Communication overall]
1.
Referring
To refer to the status of the camera.
e.g. Id? <CR> To refer to the camera ID.
2.
Setting
To set the status of the camera.
e.g. sync=1 <CR> To set SYNC system to EXT.SYNC
[Glossary]
[ ] ……omissible
<CR> ……carriage return
N ……arbitrary numeral indicating some value
A ……arbitrary numeral indicating GAIN position
X ……arbitrary numeral indicating Channel
Gain position……GAIN position of the camera
Channel …….Channel to specify the GAIN control device for each CCD output line
EEPROM …….EEPROM incorporated in the camera
[Notes]
・
Command name must be lower-case. Upper-case character is not valid.
・
Input character must be one-byte character. Double-byte character is not valid.
・
Blank is not valid.
・
Line feed code is indicated by “CR(0x0D)”. And also “LF(0×0A)” and “CR+LF” are usable.
However returning line feed code must be CR only.
<When using Hyper terminal>
・
Retyping is required In case of inputting error.(Correction by cursor movement is not valid.)
