Receiver unit
①
EQ switcher: HDMI Receiver equalizer switcher.
②
HDMI out: This slot is to connect the HDMI input port of your display
such as an HDTV.
③
IR in: Connect to the IR Receiver for IR signal reception. Ensure that
remote being used is within the direct line-of-sight of the IR receiver.
④
Power LED: This LED will illuminate when the device is connected
with power supply.
⑤
CAT: Connect the CAT input of the receiver with the CAT output of
the transmitter with CAT5E/6 cable.
⑥
Lock LED: This LED will illuminate when the HDMI signal from the
transmitter is stable.
⑦
DC 5V: Connect from 5V DC power supply into the unit and connect
the adaptor to an AC outlet.(For POC fuciton, the receiver does not need
power supply).
RX Equalizer distance adjust
If you see flickering or blinking image on the display, adjust the EQ switch
to improve the cable skew. MAX stands for the strongest HDMI signal level
for the longest possible transmission length while MIN stands for the
weakest HDMI signal level for short transmission length. Adjust the signal
level from MIN to MAX until desired video quality is displayed.
