PANEL DESCRIPTIONS
Transmitting unit
①
HDMI out: This slot is to connect the HDMI input of your display such as
an HDTV.
②
EDID: The switcher can switch copy EDID fuction,switch to left
position,the extender will copy hdmi loop out display EDID information
to source. Switch to right position,the extender will copy receiver
display EDID to sourc.
③
HDMI in: This slot is where you connect the HDMI output port of your
source equipment such as DVD/Blu-ray players or Set-Top-Box with an
HDMI cable.
④
IR out: Connect the IR Blaster cable included in the package for IR signal
transmission. Pace the IR blaster in direct line-of-sight of the equipment
to be controlled.
⑤
Power LED: This LED will illuminate when the device is connected with
power supply.
⑥
CAT: Connect the CAT output of the transmitter with the CAT input of
the receiver with CAT5E/6 cable.
⑦
Link LED: This LED will illuminate when the device is connected to HDMI
source.
⑧
DC 5V: Connect from 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
