Linhai Landboss LH800U-2D, Owner'S/Operator'S Manual

Page: 45 / 121

LH800U-2D(L)/LH800U-2D(R)
OWNER’S/OPERATOR’S MANUAL
14.0
7. CONTROL AND PARTS FUNCTIONS
7-2
CAUTION
Do not switch on 4WD if the rear wheels are spining. This may cause
severe machine damage. When switch on 4WD, the button will stay in
4WD position but 4WD mechanics maybe still disengaged. Always
apply throttle gently and let the wheels move slightly to allow the 4WD
mechanics finally engage.
The 4WD indicator on the speedometer will
come on when 4WD engaged.
7.Hi/ Lo Beam Switch
8.Light Switch. Turn on the headlight and rear position lights.
9.Hazard Light Switch– When the switch is pushed to “
▲
”, the four
signal lights are on and the buzzer is sounding.
Light Switches and Indicator Lights
WARNING
Use caution and drive at reduced speeds in conditions of reduced
visibility such as fog, rain and darkness.
Light Switches and Indicator Lights
（
EFI
）
WARNING
Watch out and drive at reduced speed on the condition of lower
visibility such as fog, rain and darkness.
Switches
It will not light up unless the main switch is turned on.