LINET Wissner-Bosserhoff ELEGANZA 4, Service Manual, Page: 22 / 57

D9S001GE4-0101 22/ 57
Lift drives - Columns
The lift unit does not have limit switches. It is connected by a cable with an eight-pin connector. The maximum current
consumption is 5.5A and maximum working voltage is 24V. The value of the consumed current and supply voltage is
displayed at LINIS.
On the Eleganza 4 bed are 2 columns in 2 different types. The head column is with lock and connected to control unit
with 2-pin connector. The foot column is without lock and connected to control unit with 2-pin connector (power) and
molex connector (data
– undercarriage module). The head column is located near back rest part and foot column is
located under the leg rest area.
The columns are fixed using two clamps to the frame undercarriage by four screws (
18±2Nm
). The clamps are
tightened with hex screws and nut (
8±2 Nm
). The mattress platform frame is fixed to the columns with 5 screws and
the cable is routed in such a manner that it is not broken .
Position Description
1

Foot column, without lock, cable length 1550 mm

Foot column, without lock, with data cable inside (Undercarriage module), cable length 1550 mm
2

Head column, with lock, cable length 2090 mm

Head column, with lock, with cable inside (localization), cable length 2090 mm
1
2
8+2Nm
18+2Nm
8+2Nm
18+2Nm