D9S001GE4-0101
13/
57
3.3.3
Integrated Attendant control panel
It is connected to the control unit via a 14-core cable terminated by a 13-pin DIN connector. The ACP panel is
connected to the Plug&Play connector which is located under the head siderails. The ACP is fitted with STOP button.
The supervisor control panel contains a lock to block individual functions of the control unit, indicator lights for the
mode and condition of the rechargeable battery, a selection of special functions, and settings for standard positions of
the bed.
Foot siderails
3.4.1
Controllers in foot side rails
The control panels (left/right) allow the patient to
set the position
of the backrest and thighrest. Autocontour buttons
are also available.
Controller commands are detected as voltage increase via a cable connected to the control unit. The cables of the
side rail can be disconnected at the edge of the mattress platform using Mini Din connectors.
Summary of Contents for Wissner-Bosserhoff ELEGANZA 4
