LINET SafeSense 3, Instructions For Use And Technical Description

Page: 72 / 92

D9U001SFS-0101_03 72
Abbreviation Meaning
Wetness Wetness Monitoring
Motion Motion Monitoring
Decubitus Decubitus/Movement
Notification
Bed Exit Bed Exit Monitoring
RANGES OF VALUES
Periods for Bed Exit Monitoring are early (about 3 seconds) or 10 se-
conds or 20 seconds or 30 seconds or 40 seconds or 50 seconds or 1
minute or 5 minutes or 10 minutes or 15 minutes or 30 minutes.
Periods for Motion Monitoring are multiples of 5 minutes from 10 minutes
to 100 minutes.
Periods for Decubitus/Movement Notification are 2 hours or 3 hours or 4
hours or 5 hours or 6 hours.
Limits of the wetness sensitivity are 25% or 50% or 75% or 100%.
Indicator Meaning
Warning will be triggered on each CareMonitor
user interface connected to the SafeSense® 3
system when corresponding status occurs during
activated monitoring (WARNINGS TURNED ON).
Warning will
not be triggered on any CareMonitor
user interface connected to the SafeSense® 3
system when corresponding status occurs during
activated monitoring (WARNINGS TURNED OFF).
Warnings visible on a single CareMonitor user in
-
terface and audible from a single CareMonitor user
interface and sent to Nurse Call system.
Warnings not visible on a single CareMonitor user
interface and not audible from a single CareMo -
nitor user interface, but sent to the Nurse Call
system.
Click on this button to zero the countdown of the
Decubitus/Movement Notification.
To change a setting of selected monitoring:
► Click on a corresponding sliding button, keep it
and slide to the required position.
► Click anywhere outside the Warnings window.
NOTE : Setting of the Bed Exit Monitoring includes
sliding button and tiles with values in minutes.
SETTINGS FOR A SINGLE PATIENT
Fig. Warnings window (settings for single
patient)
To set Sensitivity of the Bed Exit Monitoring and Motion Monitoring:
► Click on low button or medium button or high button.